MOP+MET+KETCombo Rapid Test

Factory Price One Step MOP MET KET Drug of Abuse Rapid Diagnostic Urine Test Kit

Allow the test device, specimen, and/or controls to reach room temperature (15-30 C) prior to testing. Instruct the donor to not place anything in the mouth including food, drink, gum, tobacco products for at least 10 minutes prior to collection.

1. Bring the pouch to room temperature before opening it. Remove the test device from the sealed pouch and use it as soon as possible.
2. Using the provided collection swab, remove the collector from the sealed pouch, have donor sweep inside of mouth (cheek, gum,tongue) several times, then hold swab in mouth until color on the saturation indicator strip appears in the indicator window of collection swab. Important: Do not bite, suck, or chew on the sponge.Note: If after 7 minutes, color on the saturation indicator has not appeared in the indicator window, proceed with the test below.
3. Open the cap and place the test device on a clean and flat surface. Remove the collection sponge from the mouth and insert the sponge first into the screening device gently and slowly until touch the bottom of the saliva cup, pushing the cap until it locked in place of the saliva cup. Keep upright when insert the sponge.
4. Test device upright on flat surface and keep upright while test is running.Wait for the colored signal to appear in test results area. Read the results at 10.minutes. Read saliva alcohol pads at 3 minutes.
5. If positive results are observed, secure cap with security seal and send the device to a laboratory for confirmation. The laboratory can access the reservoir through the Sample Port.